JG07RR
02-29-2008, 02:56 PM
If you have had a problem with the front center LED lights rattling try this:
1)Take off the front plastic so you have access to the back of the LED light assembly.
2)On the back bottom left corner pull out the rubber plug.
3)Find a screw small enough to fit down the hole. (I used a headless allens screw only about 3/16 in. long.) Don't screw to far only until the inside piece that rattles stops rattling. (I simply kept shaking it.) The loose piece inside should come in contact with the screw and secure it.
4)If you found the right size screw (sorry I don't know the exact one I used) put the rubber plug back in.
I'm sure this issue may have been solved already or if under warranty can be fixed that way, but since I finally got tired of putting two-sided tape everywhere I thought I'd share.
Also, once the front plastic is off look at the points that come in contact with the headlight assembly, etc. You can put some two-sided tape on there to better reduce vibrations.
1)Take off the front plastic so you have access to the back of the LED light assembly.
2)On the back bottom left corner pull out the rubber plug.
3)Find a screw small enough to fit down the hole. (I used a headless allens screw only about 3/16 in. long.) Don't screw to far only until the inside piece that rattles stops rattling. (I simply kept shaking it.) The loose piece inside should come in contact with the screw and secure it.
4)If you found the right size screw (sorry I don't know the exact one I used) put the rubber plug back in.
I'm sure this issue may have been solved already or if under warranty can be fixed that way, but since I finally got tired of putting two-sided tape everywhere I thought I'd share.
Also, once the front plastic is off look at the points that come in contact with the headlight assembly, etc. You can put some two-sided tape on there to better reduce vibrations.