removing pair valve gsxr?

[ifixbike4u]

i would like to remove the pair valve/air cut valve from an 07 GSXR and not have an FI code come up.

[mpp12]

My gsxr1000 K6 what I did I used a 20ohm 10watt resistor so I dont get the FI light.

[ifixbike4u]

thank you

[Ed Who?]

chris..what was it we tried again?

[ifixbike4u]

still need to dyno it to see if it works but we are trying the 20 ohm 10 watt

[Ed Who?]

yeah yeah..not like ive been bored....actually gonna get her up there weds.

[piper907]

I used a 20ohm 10w (dale mill-spec) and it worked well... I wouldn't reccommend using a resistor rated for any less. The 10w still gets hot so I riveted it to the bracket that held the pair valve. works like a charm and keeps it away from any wires... That may get really hot and short out on the valve cover and fry the ECU... (don't ask me how I know:)

http://cgi.ebay.com/20-Dale-RH-10-20-Ohm-1-10W-Aluminum-Case-Resistors_W0QQitemZ200188194926QQihZ010QQcategoryZ 4664QQrdZ1QQssPageNameZWD1VQQtrksidZp1638.m118.l12 47QQcmdZViewItem

[Speed]

hmmm, I did that too.